Anilox
scoring - often caused when metal particles
or filings from abrasive steel blades contaminate your inks. These
can subsequently get trapped under the blade itself, causing score
lines to the roller surface.
Contact Esterlam for
a less abrasive doctor blade solution and eliminate abrasive steel
blades from your ink system once and for all.
Poor safety record
– Operators constantly getting cut by dangerous steel and
composite fibre type blades.
Contact Esterlam for
a safer synthetic blade alternative and create a safer working environment
for your press crew.
Short blade life
– had to stop press and change blades during a run causing
expensive downtime.
Contact Esterlam for
a longer lasting blade solution. Esterlam blades require less pressure
and extend blade life far in excess that of steel whilst maintaining
print quality.
UV Ink spitting
– often experienced ‘ink spitting’ that contaminates
the printed image when running UV inks system.
The problems of Ink spitting
can be significantly reduced and in many cases eliminated by using
Esterlam synthetic blades. Call us with details of your application
for an immediate solution.
Inconsistent
print - ink tones would vary as blade
wear became excessive.
When using Esterlam blades
less pressure is required therefore reducing blade wear. This allows
more consistent and reliable print quality throughout the entire
run. Contact Esterlam for a free sample today.
|
